Registration (2nd Floor Annex) & Breakfast (Tripp Commons)8:00 AM – 9:00 AM

PLENARY

Great Hall · 9:00 AM – 10:00 AM

Optimizing Rate, Performance, Cost, and Quality: Practical Challenges for Rate Capable Aerospace Composites

Dr. Sam Tucker

Director of Composites, Materials & Structures, Boeing Engineering & Technology Innovation

Transition10:00 AM – 10:15 AM

Block / Time	T01 / Multicultural (4304/4306)	T02 / Langdon (4204)	T03 / Beefeaters (3318)	T04 / Capitol View (4224)	SPC / Council (4195)	T05 / Old Madison (3312)
Session 1 10:15 AM – 11:55 AM	Damage & Fracture: Impact 1 Chair: TBD Co-Chair: TBD	Design and Analysis 1 Chair: TBD Co-Chair: TBD	Manufaturing: Automated Fiber Placement 1 Chair: TBD Co-Chair: TBD	Composite Processing: Additive Manufacturing 1 Chair: TBD Co-Chair: TBD	Syensqo Student Paper Competition Chair: TBD Co-Chair: TBD	Computational Methods: Molecular Dynamics 1 Chair: TBD Co-Chair: TBD
	#8 10:15 AM – 10:40 AM Low velocity impact damage in 5-harness-satin weave fabric carbon-epoxy composites Zhupanska, O., Song, C.	#119 10:15 AM – 10:40 AM Designing lighter weight musical instruments and accessories with composites Comisi, D., Shiroshita, H., McGill, E., Brown, V., Whisler, D.	#56 10:15 AM – 10:40 AM Validated Ray-Tracing Model for Predicting Irradiance in Xenon Flashlamp Heating for AFP Systems Ruiz, J., Smeets, M., Davidson, P.	#24 10:15 AM – 10:40 AM Improvement and analytical estimation of axial compressive strength in additively manufactured continuous carbon fiber-reinforced thermoplastics Ichihara, N., Ueda, M., Higuchi, R., Yokozeki, T.	#143 10:15 AM – 10:40 AM Enhancing Interlayer Bonding in Additively Manufactured Thermally Curable Thermoset Composites Dashtizad, S., Baniasadi, M., Yourdkhani, M.	#39 10:15 AM – 10:40 AM Automated Processing of Mechanical Properties of Polybenzoxazine Resin and Monomer in a MD Model Through Cure and Thermal Phase Changes Muzzy, T., Kemppainen, J., Odegard, G., Evers, C.
	#251 10:40 AM – 11:05 AM Low velocity impact damage analysis enabled with AI agents Sarker, T., Lin, S.	#78 10:40 AM – 11:05 AM OpenSG: A Native JAX-MSG Framework for Thin-Walled Composite Beam Bagla, A., BALLARD (CIV), K., Yu, W.	#86 10:40 AM – 11:05 AM An Integrated Physics-Based Modeling Framework for High-Fidelity Temperature Prediction During AFP Zhan, T., Sun, Y., Zhang, D., Li, L.	#51 10:40 AM – 11:05 AM Analytical Prediction of Warping in 3D-Printed Continuous Carbon Fiber Reinforced Plastics Bando, S., Ichihara, N., Higuchi, R., Yokozeki, T.	#66 10:40 AM – 11:05 AM Additively Manufactured Anisotropic Reinforcements for Enhancing Critical Buckling Load Through Architected Composite Bracing Golin, T., Prabhakar, P.	#34 10:40 AM – 11:05 AM Automatic determination of mechanical properties from Molecular Dynamic Stress-Strain curves using Regression Fringe Response Kemppainen, J., Muzzy, T., Wavrunek, T., Odegard, G.
	#180 11:05 AM – 11:30 AM Fiber-Reinforced Elastomeric Cellular Solids for Modulated Impact Mitigation Benkirane, S., Eckstein, S., Youssef, G.	#137 11:05 AM – 11:30 AM Experimental and Numerical Strain Distributions of a Tapered Hybrid Composite Flexbeam Subjected to Tension-Torsion Loading Karatas-Demircan, C., Işık, A.	#246 11:05 AM – 11:30 AM Thermal Evolution in Automated Fiber Placement: Macro- and Micro-scale Modeling Pappu, J., Smeets, M., Davidson, P., Jain, A.	#121 11:05 AM – 11:30 AM Fracture in Printed Thermoplastic Composites with Polylactic Acid and Functionally Graded Fiber Volume Fractions Green, J., Rybak, I., Mckee, J., Flores, M.	#134 11:05 AM – 11:30 AM The Effect of Cooling Rate During Crystallization on the Thermomechanical Properties of PEEK Semi-Crystalline Thermoplastics Mosto, A., Pineda, E., Stapleton, S.	#182 11:05 AM – 11:30 AM A coupled Molecular Dynamics-Machine Learning Method for Predicting the Mechanical Properties of Diamond Aluko, O.
	#22 11:30 AM – 11:55 AM Simulation of Projectile Impact on Wind Turbine Blades Haluza, R., Cheung, L., Anderson, E., Blaylock, M., Seeley, C., Bakhmatova, S., Chang, G., Spada, F., Bodnar, E., Lee, J., Caserta, P., Hernandez, M., Luevano, J.	#115 11:30 AM – 11:55 AM Analysis of Torsional Stiffening in Hybrid Composite Flexbeam with Nonlinear Shear Response Using FE Modeling and Tension-Torsion Experiments Degerliyurt, B., Işık, A.	#126 11:30 AM – 11:55 AM Physics-Based Modeling of Residual Deformation in AFP Tow-Steered Cylinders Considering Chemical Shrinkage and Process-Induced Features Lima, G., Ravangard, A., Kravchenko, O.	#100 11:30 AM – 11:55 AM Effects of Sinusoidal Cross-Sectional Geometry and Extrusion Hardware Variance on the Flexural Response of 3D-Printed Polymers Thomas, A., Schey, M., Ballard, K.	#241 11:30 AM – 11:55 AM An Experimental and Numerical Study of Hybrid Fastening System with Dissimilar Substrates Adeyemo, K., Haq, M.	#171 11:30 AM – 11:55 AM Multiscale Mechanics of Calcium-Mediated Reinforcement within a Pectin-Cellulose Composite via Integrated MD and Experimental Approach Saeedian, K., Wu, X., Prasad, A.

Lunch · Tripp Commons (2nd Floor)11:55 AM – 1:00 PM

KEYNOTE

Multicultural (4304/4306)

1:00 PM – 1:50 PM

Materials Characterization in the Era of Additive Manufacturing and Artificial Intelligence

Dr. Nikhil Gupta

Professor, Dept. of Mechanical and Aerospace Engineering, New York University

KEYNOTE

Old Madison (3312)

1:00 PM – 1:50 PM

Manufacturing Composite Structures On-Demand

Dr. Felix Nguyen

Technical Fellow, Lockheed Martin Corporation

KEYNOTE

Beefeaters (3318)

1:00 PM – 1:50 PM

Dimensional Stability of Composite Deployable Space Structures

Dr. Kawai Kwok

Associate Professor, Aeronautics and Astronautics, Purdue University

Transition1:50 PM – 2:00 PM

Block / Time	T06 / Multicultural (4304/4306)	T07 / Langdon (4204)	T08 / Beefeaters (3318)	T09 / Capitol View (4224)	T10 / Council (4195)	T11 / Old Madison (3312)
Session 2 2:00 PM – 3:15 PM	Damage & Fracture: Impact 2 Chair: TBD Co-Chair: TBD	Design and Analysis 2 Chair: TBD Co-Chair: TBD	Manufacturing: Automated Fiber Placement 2 Chair: TBD Co-Chair: TBD	Manufacturing: Additive Manufacturing 2 Chair: TBD Co-Chair: TBD	Nano and Multifunctional Composites 1 Chair: TBD Co-Chair: TBD	Chair: TBD Co-Chair: TBD
	#166 2:00 PM – 2:25 PM Study on the Effects of Different Impact-induced Damage Modes on the Compression After Impact Behaviors of Composite Laminates Lin, S., Berry, N., Goyal, V.	#75 2:00 PM – 2:25 PM Thermoviscoelastic Multi-Scale Analysis on Woven CFRP Bistable Semi-Cylindrical Booms Sunaga, Y., Kajihara, S., Yokozeki, T., Watanabe, A.	#62 2:00 PM – 2:25 PM Effect of Manufacturing Signatures on the optimal fiberpaths for curved open surfaces manufactured using AFP Savin, E., Demant, J., Guzmán, A., Ambika Vijayachandran, A.	#132 2:00 PM – 2:25 PM A Comparative Meta-Analysis of Process-Property Relationships in Fused Filament Fabrication of PEEK Composites Fu, M., Hong, R., Scharf, J., Zobeiry, N.	#116 2:00 PM – 2:25 PM Interface-Regulated Ice Growth in Bio-Inspired Nanocomposites: Molecular Dynamics Insights Wu, X., Saadi, M., Rahman, M.
	#118 2:25 PM – 2:50 PM Investigating Delamination Growth During Compression After Impact Using an Analytical Model Mack, J., Mirza, F., Tan, K.	#217 2:25 PM – 2:50 PM Energy-Based Assessment of Bistable Composite Actuators and Harvesters Nakhla, S.	#83 2:25 PM – 2:50 PM Exploring multi-step frontal polymerization of composites in automated fiber placement Chowdhury, S., Tudoreanu, S., Papon, E.	#38 2:25 PM – 2:50 PM Additive Manufacturing of Thermosetting Syntactic Foam Beckwith, C., Gupta, N.	#85 2:25 PM – 2:50 PM Effective Thermal Conductivities of FGM Reinforced Composites Nomura, S., Krishna, N.
	#186 2:50 PM – 3:15 PM Compression-After-Impact Performance of Bio-Inspired Helicoidal and Double-Double 3D-Printed CFRP Laminates Mridha, R., Mack, J., Mirza, F., Holland, A., Tan, V., Tay, T., Tan, K.	#40 2:50 PM – 3:15 PM Torsional properties of viscoelastic materials: strain rate effects quantified using time-temperature superposition principles Chen, G., Gupta, N.	#21 2:50 PM – 3:15 PM Influence of AFP Triangular Gaps and Overlaps on Interlaminar Fracture Toughness and Compression of Thermoplastic Composites Yuhasz, B., Damm, T., Khaleghi, S., Zare Hosseinzadeh, A., Hernandez, D., Lanza di Scalea, F., Tehrani, M.	#231 2:50 PM – 3:15 PM Development of multifunctional thermoplastic hybrid composite filament for 3D printing Saha, M., Shane, T., Gautam, O.	#135 2:50 PM – 3:15 PM Coupling NASMAT to openMDAO for Modeling Thermal and Dielectric Problems Ricks, T., Bednarcyk, B., Nielsen, D., Santiago, D., Lizcano, M., Lee, J.

Coffee Break · Reception Room (4th Floor)3:15 PM – 3:30 PM

Block / Time	T12 / Multicultural (4304/4306)	T13 / Langdon (4204)	T14 / Beefeaters (3318)	T15 / Capitol View (4224)	T16 / Council (4195)	WS / Old Madison (3312)
Session 3 3:30 PM – 5:10 PM	Damage & Fracture: Ballistics and Strain Rate Effects Chair: TBD Co-Chair: TBD	Material Modeling 1 Chair: TBD Co-Chair: TBD	Manufacturing : Advanced Processing 1 Chair: TBD Co-Chair: TBD	Inverse design and Optimization Chair: TBD Co-Chair: TBD	Nano and Multifunctional Composites 2 Chair: TBD Co-Chair: TBD	Workshop - NASA CompDam Chair: TBD Co-Chair: TBD
	#10 3:30 PM – 3:55 PM Ballistic Penetration of Composites: A Parametric Study Haque, B., Hall, L.	#213 3:30 PM – 3:55 PM Effect of ageing on the viscoelastic bending stiffness of uncured thermoset prepreg Wehbe, R., Call, D.	#176 3:30 PM – 3:55 PM Temperature-Controlled Two-step Injection Overmolding of Self-Reinforced PPS Composites Boushab, D., Qiao, Y., Ramos, J., L. Brown, N., Ni, Y., M. Reese, C., Petersen, A., Salko, M., Simmons, K.	#254 3:30 PM – 3:55 PM Surrogate-Guided Inverse Design of Cure Cycles Balancing Cure, Residual Stress, and Cycle Time Rahman, J., Ramian, A., Zhao, T., Elhajjar, R.	#149 3:30 PM – 3:55 PM Composite Inverter Housing With Enhanced EMC Performance ZHAO, S., Zahid, A., Luo, T., Guralp, O., Baker, A.
	#60 3:55 PM – 4:20 PM Strain-Rate Dependent Response of Architected Flexible Syntactic Foams under Dynamic Impact Golin, T., Tewani, H., Miller, D., Shah, K., Kodagali, K., Sockalingam, S., Prabhakar, P.	#195 3:55 PM – 4:20 PM Quantifying Rate-Dependent Recovery Behavior in Uncured UD Prepregs Garcia, C., Pipes, R.	#113 3:55 PM – 4:20 PM Process-Informed Statistical Modeling of SMC Composites Nakhla, S., Ghosh, S., Kalaitzidou, K.	#63 3:55 PM – 4:20 PM An Automated Framework for Multi-Layer Variable Angle Tow Laminate Optimization Using Surrogate and Gradient-Based Methods Pourabdollah, P., Höfer, R., Beekman, R., Gehlhoff, F., Kriegesmann, B.	#210 3:55 PM – 4:20 PM Rapid Fabrication of Aligned Graphite Nanoplatelet Sheets via Flat Roller Mill as an Intermediate Route for Multifunctional Nanocomposite Coatings Dey, A., Kim, J., Sung, D.
	#170 4:20 PM – 4:45 PM Strain-rate and loading-mode effects on damage localization in woven composites: A microplane triad investigation Asif, S., Kirane, K.	#106 4:20 PM – 4:45 PM Short timescale mode II tackiness of uncured thermoset carbon/epoxy prepreg tows Chakraborty, D., Sockalingam, S., Kodagali, K., Sutton, M., Sark, A.	#49 4:20 PM – 4:45 PM Reprocessable Thermoplastic Composites with Embedded Resistive Heating for In-Situ Fabrication and Reuse in Lunar Missions Lewis, T., Hegewald, C., Jonnalagadda, V., Sanchez, R., Watkins, B., Vashisth, A.	#54 4:20 PM – 4:45 PM Adaptive Cure Cycle Design for Composite Laminates Using Proximal Policy Optimization Kim, G., Melkote, S., Colton, J.	#13 4:20 PM – 4:45 PM Thermoset polyolefin thermosets with multifunctional thermal and electrical Properties Kamble, M.
	#17 4:45 PM – 5:10 PM High strain rate failure envelope characterization of T700/LMPAEK unidirectional composites under off-axis tensile loading Kodagali, K., Sockalingam, S., Rajan Kattil, S., Miller, D., Shah, K., Sutton, M., Pereira, M., Goldberg, R., Littell, J., Miller, S.	#97 4:45 PM – 5:10 PM Effective Viscoelasticity of Core-Shell Rubber-Modified Epoxy: Identification of Nanoscale Behavior from Macroscopic Response Sera, Ｋ., Hoshikawa, Y., Kawagoe, Y., Ryuzono, K., Mishima, S., Okabe, T.	#82 4:45 PM – 5:10 PM Thermal Analysis and Design of High-Rate Composite Manufacturing on the ISS Shin, S., Rasheed, N., Zheng, Z., Younse, P., Tighe, K., Miller, J., Baur, J., Geubelle, P., Tawfick, S.	#6 4:45 PM – 5:10 PM Mathematical Analysis of Fiber velocity and Impregnation Pin radius on Fiber bundle tension in Thermoplastic melt Impregnation Mustafa Memon, G., Hussain, I., David Boom, P.	#230 4:45 PM – 5:10 PM Electric field induced CNT alignment and networking in CNT/CF/Epoxy composites: Mechanical properties enhancement She, X., Zhang, D., Taub, A.

Transition5:10 PM – 5:20 PM

DIV MTG

Analysis & Testing Division Meeting

Multicultural (4304/4306)

5:20 PM – 6:30 PM

DIV MTG

Emerging Composites Technologies Division Meeting

Council (4195)

5:20 PM – 6:30 PM

DIV MTG

Durability & Damage Tolerance Division Meeting

Langdon (4204)

5:20 PM – 6:30 PM

DIV MTG

Design & Manufacturing Division Meeting

Capitol View (4224)

5:20 PM – 6:30 PM

NSF

NSF Student Speed Mentoring

Great Hall (4th Floor)

5:20 PM – 6:30 PM

Welcome Reception & Student Poster Presentation

Tripp Commons (2nd Floor) · 6:30 PM – 8:30 PM

Detailed Agenda